dp0150alp4 / dp0150blp4 document number: ds31493 rev. 7 - 2 1 of 5 www.diodes.com may 2015 ? diodes incorporated dp0150alp4 / dp0150blp4 new product 50v pnp small signal transistor in dfn1006 features ? bv ceo > - 50 v ? i c = - 100ma high collector current ? p d = 1000mw power dissipation ? 0. 60 mm 2 p ackage f ootprint, 1 3 times s maller than sot23 ? 0. 4 mm h eight p ackage m inimizing o ff - b oard p rofile ? compleme ntary npn type : dn0150alp4 / dn015 0blp4 ? totally lead - free & fully rohs c ompliant (notes 1 & 2) ? halogen and antimony free. green device (note 3) ? qualified to aec - q101 standards for high reliability mechanical data ? case: x2 - dfn1006 - 3 ? case material: molded plastic, "green" molding compound. ul flammability classification rating 94v - 0 ? moisture sensitivity: lev el 1 per j - std - 020 terminals: finish ? nipdau . ? solderable per mil - std - 202, method 208 ? weight: 0.0008 grams ( a pproximate) ordering information (note 4 ) product marking reel size (inches) tape width (mm) quantity per reel dp0150alp4 - 7 t5 7 8 3,000 dp0150alp4 - 7 b t5 7 8 10,000 dp0150blp4 - 7 t6 7 8 3,000 dp0150blp4 - 7 b t6 7 8 10,000 note s: 1 . no purposely added lead. fully eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporateds definitions of hal ogen - and antimony - free, "green" and lead - f ree . 3. halogen - and antimony - free "green products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4 . for packaging details, go to our website at http://www.diodes.com/products/packages.html . marking information bottom view top view pin configuration x2 - dfn1006 - 3 device symbol dp0150alp4 - 7 dp0150blp4 - 7 xx xx xx xx xx xx top view bar denotes base and emitter side xx from date code 1527 (yyww), this changes to : xx top view dot denotes collector side dp0150alp4 - 7b dp0150blp4 - 7b xx top view bar denotes base and emitter side xx xx xx xx = product type marking code (see ordering information) xx = product type marking code (see ordering information) c e b e4 c e b
dp0150alp4 / dp0150blp4 document number: ds31493 rev. 7 - 2 2 of 5 www.diodes.com may 2015 ? diodes incorporated dp0150alp4 / dp0150blp4 new product absolute maximum ratings (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit collector - base voltage v cbo - 50 v collector - emitter voltage v ceo - 50 v emitter - base voltage v ebo - 5 v collector current - continuous i c - 100 ma peak pulse collector current i c m - 2 00 ma base current i b - 30 ma thermal characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (note 5) p d 4 00 mw (note 6) 1 000 thermal resistance, junction to ambient (note 5) r ? ja 310 c/w (note 6) 120 thermal resistance, junction to lead (note 7) r ? jl 120 c/w ? j , t stg - 55 to +150 c esd ratings (note 8 ) characteristic symbol value unit jedec class electrostatic discharge - human body model esd hbm 4,000 v 3a electrostatic discharge - machine model esd mm 400 v c electrical characteristics ( @t a = + 25c , unless otherwise specified .) characteristic symbol min typ max unit test condition off characteristics collector - base breakdown voltage b v cbo - 50 c = - 10 e = 0 collector - emitter breakdown voltage (note 8 ) b v ceo - 50 c = - 1ma, i b = 0 emitter - base breakdown voltage b v ebo - 5 e = - 10 c = 0 collector cut - off current i cbo cb = - 50v, i e = 0 emitter cut - off current i ebo eb = - 5v, i c = 0 on characteristics (note 9 ) collector - emitter saturation voltage v ce(sat) c = - 100ma, i b = - 10ma dc current gain dp01510alp4 dp01510blp4 h fe 120 ce = - 6v, i c = - 2ma 200 small signal characteristics transition frequency f t 80 ce = - 10v, i e = 1ma f = 30mhz output capaci t ance c ob cb = - 10v, i e = 0, f = 1mhz notes: 5. for the device mounted on minimum recommended pad layout 1oz copper that is on a single - sided 1.6mm fr4 pcb; device is measured under still air conditions whilst operating in steady state condition. the entire exposed collector pad is attached to the heatsink. 6. same as note 5, except the exposed collector pad is mounted on 25mm x 25mm 2oz copper. 7. thermal resistance from junction to sold er - point (on the exposed collector pad). 8. refer to jedec specification jesd22 - a114 and jesd22 - a115. 9. measured under pulsed conditions. pulse width ? 300s. duty cycle ? 2%.
dp0150alp4 / dp0150blp4 document number: ds31493 rev. 7 - 2 3 of 5 www.diodes.com may 2015 ? diodes incorporated dp0150alp4 / dp0150blp4 new product electrical characteristics (@ t a = +25c, unless otherwise specified.) 0 1 2 3 4 5 -v , collector-emitter voltage (v) ce fig. 2 typical collector current vs. collector-emitter voltage (dn0150blp4) 0 0.10 - i , c o l l e c t o r c u r r e n t ( a ) c i = -1ma b i = -2ma b i = -3ma b i = -4ma b i = -5ma b 0.05 0.15 0.20 0.1 1 10 100 1,000 -i , collector current (ma) c fig. 3 typical dc current gain vs. collector current (dn0150blp4) 10 100 1,000 h , d c c u r r e n t g a i n f e t = 150c a t = 25c a t = -55c a t = 85c a v = -6v ce -i , collector current (a) c fig. 6 typical base-emitter saturation voltage vs. collector current 0.0001 0.001 0.01 0.1 1 - v , b a s e - e m i t t e r s a t u r a t i o n v o l t a g e ( v ) b e ( s a t ) 0.2 0.4 0.6 0.8 1.0 1.2 t = 150c a t = 25c a t = -55c a t = 85c a i = 10 cb /i 0.0001 0.001 0.01 0.1 1 -i , collector current (a) c fig. 4 typical collector-emitter saturation voltage vs. collector current 0.01 0.1 1 - v , c o l l e c t o r - e m i t t e r s a t u r a t i o n c e ( s a t ) v o l t a g e ( v ) i /i = 10 cb t = 85c a t = 25c a t = -55c a t = 150c a -i , collector current (a) c fig. 5 typical base-emitter turn-on voltage vs. collector current 0.0001 0.001 0.01 0.1 1 - v , b a s e - e m i t t e r t u r n - o n v o l t a g e ( v ) b e ( o n ) 0.2 0.4 0.6 0.8 1.0 1.2 0 t = 150c a t = 25c a t = -55c a t = 85c a v = -6v ce 0.1 1 10 100 v , reverse voltage (v) r fig. 7 typical capacitance characteristics 0 1 10 100 c a p a c i t a n c e ( p f ) c ibo c obo f = 1mhz
dp0150alp4 / dp0150blp4 document number: ds31493 rev. 7 - 2 4 of 5 www.diodes.com may 2015 ? diodes incorporated dp0150alp4 / dp0150blp4 new product package outline dimensions please see ap02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. suggested pad layout please see ap02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. x2 - dfn1006 - 3 dim min max typ a ? ? a1 0 0.05 0.02 b1 0.10 0.20 0.15 b2 0.45 0.55 0.50 d 0.95 1.05 1.00 e 0.55 0.65 0.60 e ? ? ? ? l1 0.20 0.30 0.25 l2 0.20 0.30 0.25 l3 ? ? ? ? all dimensions in mm dimensions value (in mm) z 1.1 g1 0.3 g2 0.2 x 0.7 x1 0.25 y 0.4 c 0.7 0 50 100 150 200 250 0 2 4 6 8 10 -i , collector current (ma) c fig. 8 typical gain-bandwidth product vs. collector current f , g a i n - b a n d w i d t h p r o d u c t ( m h z ) t v = -6v f = 30mhz ce l2 a1 e b2 l1 l3 d e b1 a y c g1 g2 x x 1 z
dp0150alp4 / dp0150blp4 document number: ds31493 rev. 7 - 2 5 of 5 www.diodes.com may 2015 ? diodes incorporated dp0150alp4 / dp0150blp4 new product important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other c hanges without further notice to this document and any product described herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license unde r its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diod es incorporated website, harmless against all damages. diodes incorporated do es not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. should customers purchase or use diodes incorporated products for any unintended or unauthorized application, customers shall indemni fy and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized applicat ion. products described herein may be covered by one or more united states, international or foreign patents pending. product nam es and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this doc ument is written in english but may be translated into multiple languages for reference. only the english version of this do cument is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or systems are devices or s ystems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in signific ant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expe cted to cause the failure of the life support device or to affect its safety or effectiveness. cu stomers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety - related requiremen ts concerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such safety - critical, life support devices or systems. copyright ? 201 5 , diodes incorporated www.diodes.com
|
